You have a Rolex watch that is covered in deep pits, giving it a rough and uneven appearance. But don’t worry, there’s a solution! In this video by JooltoolUSA, you’ll learn how to easily remove those pits without altering the size or shape of your Rolex. The technique involves using a unitized wheel in fine grit, which ensures a flat surface and prevents any damage to the edges of the watch. By following the steps shown in the video, you’ll be able to smooth out the rough edges and restore your Rolex to its original, pristine condition. So grab your watch and get ready to witness some magic happen!
The video shows the step-by-step process of removing the deep pits from the Rolex, making it look as good as new. The host demonstrates the use of the unitized wheel in fine grit, showcasing how it sands down the rough edges without changing the watch’s shape or size. The end result is a Rolex that appears untouched and identical to its original finish. Additionally, the video emphasizes that this technique can be applied to any side of the watch, making it a versatile solution for any pits or scratches. So if you’re looking to restore the beauty of your Rolex watch, this video is a must-watch!
Removing deep pits from a Rolex watch using JooltoolUSA
Introduction
If you own a Rolex watch, you know how valuable and timeless these timepieces are. However, over time, your watch may develop deep pits that can detract from its beauty and value. Fortunately, there is a solution – JooltoolUSA. In this article, we will guide you through the process of using JooltoolUSA to remove deep pits from your Rolex watch. With the right tools and techniques, you can restore your watch to its former glory.
Tools needed
Before you begin the process, you will need a few tools from JooltoolUSA:
- Unitized wheel (fine) – This will be used to smooth out the pits.
- Polishing wheel – After removing the pits, this wheel will help you achieve a polished finish.
- Buff – The final step in the process, the buff will enhance the shine of your watch.
Preparing the watch
Before you start working on your watch, it is important to assess the level of pitting. This will help you determine the extent of the damage and plan your approach accordingly. Additionally, take protective measures for your watch by covering sensitive areas, such as the dial and crown, with tape or plastic. This will prevent any accidental damage during the restoration process. Lastly, set up your workspace in a clean and well-lit area, ensuring you have enough space to work comfortably.
Using the unitized wheel
Now that your watch is prepped and your workspace is ready, it’s time to start using the unitized wheel. First, choose the right wheel for the job. The fine unitized wheel is recommended for removing deep pits. Ensure that the wheel is flat and well-mounted on your JooltoolUSA machine.
With the machine turned on, carefully apply the wheel to the pits on your watch. Move the wheel in small, circular motions, applying even pressure. Be mindful of the surrounding areas and try to minimize any potential damage to the watch. Take your time during this step, as it is crucial to remove the pits while preserving the original shape of the watch.
Smoothing out the nicks
After using the unitized wheel, assess the remaining nicks on your watch. These nicks may be less severe than the initial pits and can be smoothed out using the same technique. Move the unitized wheel over the nicks in circular motions, gradually reducing their visibility. It’s important to be gentle during this step and maintain the shape of the watch.
Dealing with remaining pits
While the unitized wheel is effective in removing most pits, there may be some stubborn ones that require further attention. Identify these remaining pits and consider a targeted approach to remove them. You can use a fine-grit sandpaper or a diamond file to carefully file down the pits, ensuring you do not damage the surrounding areas. Check for a smooth surface after each pass to evaluate your progress.
Polishing the watch
Once you are satisfied with the removal of pits, it’s time to polish your watch. Prepare the polishing wheel by attaching it securely to your JooltoolUSA machine. With the machine turned on, apply the polishing wheel to the surface of your watch. Move the wheel in small, circular motions, ensuring even coverage. This will help achieve a polished finish and restore the shine of your watch.
Finishing touches
To add the final touches to your restored watch, use a buff. The buff will enhance the shine and give your watch a professional finish. Apply the buff to the surface of your watch using light pressure and circular motions. This will help remove any remaining imperfections and bring out the full luster of your watch.
Conclusion
In conclusion, using JooltoolUSA to remove deep pits from your Rolex watch is a highly effective and satisfying process. By following the steps outlined in this article, you can restore your watch to its original beauty and increase its value. Remember to take the time to assess the level of pitting, choose the right tools, and be mindful of the watch’s structure. With patience and attention to detail, you will be able to achieve impressive results and enjoy a fully restored Rolex watch.
